dsh-tender-extract
Verifieddsh-tender-extract · v0.2.6 · Apache-2.0
招标文件条款摘录核对(按出处与原文逐字核对摘录完整性,仅提示差异,不作出定性结论)
Install
dsh plugin add dsh-tender-extract Confirm the layer applied with dsh --profile default --dump-config — see the install guide.
Source
Tags
Readme
dsh-tender-extract — Tender document clause-extract table check (source and raw text)
dsh-tender-extract reads one clause-extract table — the package header plus one row per extract — applies a versioned rule pack and returns a report on that table alone: that every row gives its source (sourceRef), that the raw clause text column (rawText) is filled in, that the distilled requirement (requirement) shares at least some terms with that raw text, that a recorded category is on your institution's list, that no extract number (seq) is repeated, that the header names the project and the source document, and that no template placeholder survives in the raw text. The clause-category vocabulary ships empty, and with nothing configured TE-004 reports itself in skipped instead of passing quietly.
What it looks like

Real output from this plugin over its own TE-007 test fixture — not a mock-up. The rule pack ships no invented quotations, so a finding names both the clause it applied and the fact that the clause text was not obtained.
What it answers
| You ask | What it answers |
|---|---|
| One extract in my table has nothing in the source column. Is that reported? | Yes. TE-001 requires sourceRef on every extract and reports each row where it is blank. It checks that the source is recorded, never that it points to the right place, and it does not prove that an extract is missing — completeness can only be judged against the whole tender document, which this plugin never sees. |
| The raw text column is filled in — does the plugin confirm it matches the tender document word for word? | TE-002 only checks that the rawText column is filled. It does not compare that text against the tender document; that comparison needs the document itself in hand. |
| The distilled requirement looks as if it came from somewhere else entirely. Will that be flagged? | TE-003 looks for shared terms between requirement and rawText — overlapping Han bigrams and whole Latin words — and reports the row when the two share nothing. Paraphrase legitimately changes wording, so a finding means the two columns look unrelated and are worth a human look, never that the distillation is wrong. It also cannot catch a distillation that is wrong while sharing vocabulary, and the minShared floor of 2 is a local convention, not a standard figure. |
| We have not decided how to classify our clauses yet. What happens to the category column? | Its values ship empty, so TE-004 reports itself in skipped rather than passing quietly until you fill them in. Once configured it checks only that the recorded value is on your list; it does not decide which category a clause belongs to. |
| Two extracts in the table carry the same number. | TE-005 compares the seq values ignoring whitespace differences and reports the repeat, because a number that appears twice cannot be cited unambiguously. It does not judge whether the numbering is otherwise sensible. |
| The raw text of one extract is still the template wording. | TE-007 reports a row whose rawText still contains a placeholder from the factory list — 【, 】, {{, }}, XXX, xxx, 待填, 待补充, TBD, todo, 示例 — because an extract still carrying one was copied from the template rather than filled in. The list deliberately excludes (略), a legitimate way to abridge a long clause, and it can only find the words on that list. |
Standards it follows
| Document | Number | Cited by rules |
|---|---|---|
| 《中华人民共和国招标投标法》 | 1999年8月30日通过,2017年12月27日修正(全国人大常委会《关于修改〈中华人民共和国招标投标法〉、〈中华人民共和国计量法〉的决定》),本法自2000年1月1日起施行 | TE-001, TE-002, TE-003, TE-004, TE-005, TE-006, TE-007 |
Boundary: this plugin checks a 招标文件条款摘录表 for what a checklist can be held to — that every extract gives its source, that the raw clause text is recorded, that the distilled requirement bears some lexical relation to that text, that the category comes from your vocabulary, that numbers are unique, and that no placeholder survives.
⚠️ What this plugin can and cannot do
It cannot prove that a clause was missed. Deciding whether an extract is complete requires comparing against the whole tender document, and this plugin only ever sees the extract table. It does not claim otherwise, and its rule notes say so:
TE-001checks that a source is recorded, never that the extract is exhaustive.
TE-003is the only content judgement here, and it is deliberately weak. It looks for shared terms between the raw text and the distilled requirement, using overlapping Han bigrams and whole Latin words, and reports only when the two share nothing. Paraphrase legitimately changes wording, so a finding means "these two columns look unrelated, worth a human look" and never "the distillation is wrong". It also cannot catch a distillation that is wrong while sharing vocabulary — that limit is stated in the rule's own note and in its README entry.The rule pack states its citation status rule by rule. 1 of its 7 rules quote verbatim clause text and are marked
direct; the remaining 6 state in theexcerptfield itself that the text was not obtained, and stay atwarnorinfo. Where a rule still carries that note, treat it as a lead rather than as a citation. The regime lives in 《中华人民共和国招标投标法》and its implementing regulations. For the rules whose text the verification pass could not retrieve, the pack states the gap in theexcerptfield itself rather than paraphrasing it, and those rules stay atwarnorinfo. When the texts are in hand, replace eachexcerptwith the real clause and raisekindtodirect. The clause-category vocabulary ships empty; with nothing configured,TE-004reports itself inskippedrather than passing quietly.
Compatibility
| Surface | Status |
|---|---|
| Harness | Peer range >=0.1.2-rc.1 <0.2.0 || >=0.2.0-0 <0.3.0 — verified to accept both 0.2.0-rc.2 and 0.2.1-alpha.1. engines.dsh is deliberately not declared: it has no reader and cannot reject a host |
| Node | `^22.19.0 |
| Platforms | All (plain ESM; no native code, no network, no model call) |
| Tool mode | Works in native, ptc and both; for a whole document use ptc |
What it does
Registers the tender_extract tool. It reads one clause-extract table — the package header plus one row per
extract — applies a versioned rule pack, and returns a report.
| Rule | Check | Severity | Basis kind |
|---|---|---|---|
TE-001 |
every extract gives its source | warn | principle |
TE-002 |
every extract records the raw text | warn | principle |
TE-003 |
the requirement shares terms with the raw text | warn | direct |
TE-004 |
the category comes from your vocabulary (off by default) | info | local |
TE-005 |
extract numbers are unique | warn | principle |
TE-006 |
the table names its project and source document | warn | principle |
TE-007 |
the raw text holds no unreplaced placeholder | warn | principle |
Install
dsh plugin --profile <name> add dsh-tender-extract
dsh --profile <name> --dump-config | grep 'dsh-tender-extract'
Configuration
| Key | Type | Default | Description |
|---|---|---|---|
rulesFile |
string | rules/tender-extract.yaml |
Rule-pack path, relative to the package root |
disabledRules |
string[] | [] |
Rule ids to stop running; each appears in skipped |
onlyRules |
string[] | [] |
Run only these rule ids; empty runs every rule |
skipNotes |
string | "" |
Note appended to every skipped reason |
timeoutMs |
number | 120000 |
Cooperative tool timeout budget |
Rule-level parameters worth knowing:
TE-003leftField/rightField/minShared— the two columns and the shared-term floor,2by default. Set it to1to be more permissive; the floor is a local convention, not a standard figure.TE-004values— your clause categories, e.g.[资格条件, 技术规格, 商务条款, 评标办法, 合同条款]. Empty means no check.TE-007terms— the placeholders to look for. 「略」 is deliberately absent:……(略)is a normal and legitimate way to abridge a long clause, so it is not treated as a placeholder.
Material format
The tool accepts JSON or YAML:
project: 某某工程施工招标
tenderNo: ZB-2026-018
source: 招标文件 2026-02-10 版
rows:
- { 序号: '1', 出处: 第三章 第 3.2 条,
原文: 投标人应具有建筑工程施工总承包二级及以上资质,并附资质证书复印件。,
类别: 资格条件, 要求: 需具备建筑工程施工总承包二级及以上资质并提供证书复印件,
是否实质性: 是, 响应: 需响应, 责任部门: 经营部 }
Column names are matched case-insensitively and ignoring spaces, underscores and hyphens; the table's own column names are kept, so a finding names the column it read.
Rule sources
Rule data lives in rules/tender-extract.yaml. The pack's header states the citation gap in full, and each
rule's note repeats the part that matters for that rule. The load-time guard that normally enforces "an
excerpt must be a real quotation of at least eight characters" cannot tell a quotation from a description —
so this pack leans on the header, the per-rule notes and a test that asserts every excerpt admits the gap.
Troubleshooting
TE-003fires on a distillation I am happy with. The two columns share no terms — usually because the requirement was reworded into different vocabulary. RaiseminSharedto1, or disable the rule.TE-003does not catch a distillation I know is wrong. It cannot: the columns share vocabulary. This is the documented limit of a lexical check.TE-007does not fire on(略). That is deliberate; add 「略」 totermsif your template really uses it to stand in for a whole clause.TE-004never runs. Its vocabulary is empty; fill it with your register's categories.- The plugin installs but the tool never appears. Check that
mainresolves tolib/index.mjsand thatpnpm run buildproduced it; a wrongmainmakes the loader skip the entry silently. dsh plugin addrefuses the package as incompatible. The peer range covers0.1.xand0.2.x; if your runtime sits outside it, grant an explicit exemption:dsh plugin --profile <name> allow-version [email protected] --dsh-version <runtime> --accept-riskcheckreportsmanifest-peersas failed. The static checker compares against a hard-coded peer range that predates the 0.2 line. The runtime enforces peer compatibility at install time, so the declared range is the correct one; this is a known upstream issue indsh-plugin-dev.
Development
pnpm install
pnpm run typecheck # tsc --noEmit
pnpm test # vitest, the shared table-plugin suite plus paired fixtures
pnpm run build # tsdown -> lib/index.mjs + lib/index.d.mts
node ../scripts/sync-shared.mjs dsh-tender-extract # refresh src/shared from ../_shared
The plugin is data-only: src/model.ts declares the table shape, the shared kit supplies the reader and
the check engine, and the rule pack declares every check.
License
Apache License 2.0 © 2026 dsh-tender-extract contributors.